Vr HeadWay configuration is simple and straightforward. Only parameter required by the compensation module is user’s head position relative to top frame rotation center. We encourage you to make necessary measurements and provide this necessary configuration parameter as it will improve your VR experience.
- Left-Right is 0 (zero) in most cases (e.g. for HS-203).
- Rear-Front is X value from the diagram, but make sure that the sign is entered correct. If the head is in front of pivot point (Front), then the value should be positive. If the head is behind pivot point (Rear), then the value should be negative (e.g. for HS-203).
- Height is Y from the diagram.